CLASSIFIEDS
If you have racing related items for sale and wish to have them posted here, please email information and pictures to nwpro4alliance@yahoo.com
RACE CARS for SALE
PART and Other MISC. Items for SALE
In an effort to ensure these listings are current all ads will be posted for 6 months. If at the end of 6 months your item(s) has not sold please contact us so that we can extent the run time. If we do not receive notification the ad will be discontinued. On the same note, if your item(s) sells within that 6 month period, notify us as well so that we may remove the ad. This will save you and interested buys a good deal of time and effort.
Thank you.
Thank you.
could use rebuild. $5500.00 obo
Contact John Soares at 909-882-0968
Tube Frame Coilover Chassis Car with 8” Ford Rear end. Monte Carlo Body
ran this past
season.
2300c.c.
Ford Engine
If you cant find what you are looking for in the Northwest Pro4 Alliance classifieds, racingjunk.com is a website dedicated to racing (of all forms) classifieds. You can list your items for sale or browse for nearly anything racing related. Even if you're not in the market for anything right now, you should check it out for future reference.
COMPLETE
JSR RACE CAR
PRO-4 FOR SALE
#68 pro4 For Sale!
2300cc Ford w/ dual webers, Arca head, Thunder valley header, Titanium intake valves w/ beehive springs, Carillo Rods (5.7) (will share dyno numbers to serious buyers) Speedway quickchange, 12 aluminum wheels, On board fire system, Too many extras to list.
$8500.00 firm - Contact Jim Bailey (208)941-2704 7/11
7/11
CAR FOR SALE
2008 Chuck Lahourge pro-4 chassis. It has a 2330 cc speedway engineering bottom end with a Esslinger D port AlumCylinder head. New lower end bearings and
inspection last year. Rearend is a speedway quick change with extra gears. Car is always a top car at Meridian speedway and has the best of everything. Asking 7500.00 OBO.
Asking 7500.00 OBO. We also want to sell a Fresh destroked 2050 with billet crank, ford SVO cylinder,Esslinger fully ported cast iron head and many extra parts. Contact Randy Tillman AT 208-401-4153 10/11
10/112009 Fastrack engineering PRO-4 complete turn key car For Sale
2010 ASA PRO4 Champion.
This car was built, bump stopped and set up by Eddie Secord. Car has 8 races on it. Every part on this car is brand new, a 2300 built by Anderson Race engines, Msd ignition, Winters Quick change, 18v battery fire system, wilwood disc brakes. No corners were cut building this car. Waytoo much to list.
All spear parts will go with car.
$35,000 or might be willing to trade for sand toys or old car.
Any questions feel free to call or e-mail David Glidewell Jr. 951-505-6804 pro431champ@gmail.com10/11
10/11
For Sale:
Wheels 13x10 $20 each
3 Aero or Bart 4x4 ¼ x3 backspace
9” Gears 28 spline $250 each set
529 w/mini spool
543 w/mini spool
700 w/ alum full spool
8 gallon Fuel Cell w/Foam & container $85 each
8 gallon Fuel Cell w/container no Foam $70
8” Rearend w/ stock Axles 28 spline & drum brake & spare brake shoes $100
8” 340 Welded Axle Gears 28 spline $150
Safety Solutions, Inc. the leader in Carbon Fiber head and neck restraints, announces the New Value added Rage Series of head and neck restraints. The Hutchens Hybrid Rage and the R3 Rage Head and Neck Restraints were developed for the sportsman racer, offering tailor fit applications for multiple types of motorsports.
The head and neck restraint leader with the most SFI 38.1 certified devices unfolds the industry's latest cutting edge Technology with the racers needs and safety top priority. The Rage series features the same qualities as the full carbon fiber models such as SFI 38.1 certification, standard quick release tethers (no-up charge), Comfort, Multiple Impact protection, Multiple Angular protection, Excellent Head Movement and Simplicity at an unbeatable value.
The Rage series devices are designed as Carbon Fiber reinforced composite restraints, for their futuristic look and overload protection, not offered by competing injection molded designs.
The Hutchens Hybrid Rage, a Composite counter part to the industry standard Hutchens Hybrid Carbon Fiber Model, retails for an incredible $735. The R3 Rage, a Composite counter part to the well-known R3 Carbon Fiber Model, retails for an even lower $695.
Contact Dane Bergman at Bergman Racing Supply
2.3 Ford Esslinger Aluminum D-Port Head Dry Sump Motor
Built by Nat Chiavettone. Only 13 races on the motor. Bolt it in and race. External pump, oil tank and hoses included (hoses and fittings and tank were over $2000 alone). Kevco oil pan, stock crank. New belts (have spare belts also).
I have all the
paperwork for
this motor.
$7,000.00
Phone Number:
(508) 498-8718
9/11
FOR SALE
Tube chassis coil over Pro4 with a quick-change rear end. Car has a brand new Mitsubishi engine and comes with new body. Transmission is a t-10 with lighten gearsPrice $6500.00Car is located in Salt Lake City area
Price $6500.00Car is located in Salt Lake City area For more information call Jeff Nish @ 801-706-2386 9/11
9/11Toyota 3t 2.0l 13 races since new
- Strapped main cap.
- Eagle rods.
- 88mm 13.8:1Super-
tech coated pistons.
- Cometic 89mm head
gasket
- 9qt custom pan with
trap door and windage
tray. External Weaver
Brothers belt driven oil
pump.
- Custom BRD
camshaft- HKS Gear Drive
- Oil squirter on
distributor gear.
- Alum water pump
pulley.- Alum double crank
pulley
- Racing water pump
- Rocker arm clamp collars.
- Ported and polished head. Big valve springs.
TI retainers. Stainless Valves. Fresh valve job on head.
- Smith Brothers chromoly push rods
- Dual 45mm weber carbs. 36mm venturies.
- Kinser Air Filter with carbon fiber base, foam filter, and outerwear.
- PJ Racing Dual Intake
- Includes fuel regulator and fuel lines to carbs, bell crank and linkage.
- MSD 6AL box and electronic distributor.
Championship winning pro 4 engine. Numerous wins.
Asking $4800.00 CALL 916-929-3510 Location: Sacramento
also have a complete weber jet kit for sale with motor, (deluxe kit with every air, main, and idle jet, venturies, emulsion tubes, you would need) 9/11
9/11
FOR SALE
Pro 4 Race Car less Engine & Transmission.
Tube Frame-Coil over Suspension Chassis with Dodge Body.
Built and ran 9 times in
2009 - stored inside since.Frame and interior Powder Coated.
Speedway Engineering 8” Ford Floater Rear end and front aluminum hubs.
Longacre gauge panel and switch panel, Pro Shocks and Eibach Springs, Wilwood Rotors-Calipers-Master Cylinders.
Quality parts used throughout car
Extra parts to go w/ car
$8,000.00 OBO
Phone 509 921-6529 or raziiracing@comcast.net
4 complete Ford 7.5" rear ends all different gear ratios for low 3's through high 5's.
Please call for
details.
Will consider
all offers for the
lot of them!
GW Walker
Direct: 509-654-7613 Cell: 509-728-3107
Fax: 509-452-1588 gwalker@marq.net 9/11
SS4 / Pro 4 Late Model For Sale
Grand Prix Body Style, Engine > Ford 2300, Transmission > 4 Speed w/ Gold Star Clutch & Flywheel, Weight Jacks On All 4 Corners, Ultra-Shield Full Contmnt Seat, SafeCraft Fire Suppression System, Longacre Guages
Extras include … Grand Prix spare body 90 % complete, Spare 4 Speed Transmission, 2 Spare
1988 Nissan 200sx For Sale
Lots of new parts. Motor refreshed last year. Several spare parts.
Has 2007 Monte Carlo fiberglass body. Legal for new super stock 4 series in Washington state (check pro 4 alliance web site for information on series)this car is multi time champion. Stock
4-cylinder Race Car for sale
Tube chassis, coil over’s, 3 link, Dry sump Ford 2300 with side drafts, 8" rear end with disc brakes. Been ran on dirt and asphalt and won on both. Won every race it was in the last 2 years with 2 different drivers. Fast and very easy to drive.
#41 NW Pro 4 Alliance
For Sale
2007 & 2008 Northwest Pro4 Alliance Championship car driven by Kameron McKeehan. This car
Mouse over the image to read the details.
FOR SALE
11 nearly new 13x10 4 on 4 1/4" wheels with hoosier and american racer tires
MAKE OFFER!
Call Ken Muth 425 971-4251 10/11
10/11Northwest Pro-4 Alliance #6 car is for sale
Finished 2011 Championship in 2nd place.
Fast Track chassis, 2.3 Ford engine (engine new for 2011 season. Only 6 races on bottom and 3 on new head), “NEW” Ported Arca Head, Ceramic coated header, 4 Mikuni carb set-up, Dry-sump, Barns 4 stage dry sump pump, Coleman steering rack, Speedway Engineering hubs, Wilwood 4 piston calipers on front and Wilwood 2 piston calipers on rear, DPI brake re-circlulator on front brakes, Brake blower fans on front, Mini Martinsville rotors on front, Aluminum drive shaft, QA1 shocks on all for corners with the good stuff from
Knaake, Speedway Engineering Mini quick change rear end, 2 Halon fire systems. 1 manual driver compartment and 1 automated on fuel cell, Full Containment seat, Filtered cool air system for driver helmet, Push to talk and antennae , 9 Bassett red powder coated wheels, Extra body plus some extra pieces as well, $9,950 Meridian, Idaho, Mike Bailey 208-861-1958 10/11
10/11
a complete engine with a cast iron head or a aluminum d-port head, Kirky seat with leg and head supports, longacre gauges memory tach, I have an oil cooler I will sell with it, long acre switch panel, a complete 99 monte carlo body, two spare 90% complete taurus and monte carlo bodies, holly 4412 carburator, it can be a complete ready to race car if he wants me to build it or comes with everything to make it ready to race just not assembled, $5,500 OBO if I build it or $2,500 OBO if buyer builds it I am open to offers and may except trades for a 4 wheeler or outlaw kart 500 Sorry Bob but I don't have any pictures for it yet let me know if there are any questions 208-921-1838 10/11
10/11FOR SALE AS A PRO4 or SS4
I am willing to sell the car as is or when I am finished rebuilding it, it will be up to the buyer. Car is a Thompson chassis, Ford 9" rear end, Stock for 4 speed tranny, gm brakes in rear, pinto brakes in front, pinto A arms, Afco shocks all around, can come with
has 12 races on it all parts new in 2008. The car comes with extra gears, wheels, shocks, new 03 ARP roof, quarters, tail. This car is turn-key, minus seat.
$8,000 with a cast iron ported roller cam cylinder head. Or $10,000 with a SVO alum roller cam head.
Kevin McKeehan 208-746-6444 10/11
10/11suspension with jacking bolts rear coil over’s on struts. Car is located in BC, Canada
$5,500.001-250-664-6077 9/11
1-250-664-6077 9/11 rear ends, Spare Coil Springs, 4 Hoosier Practice Tires, 4 American Racer Practice Tires.This is an older front strut chassis w/ 4 Link rear end … This is well built car with safety in mind for the person who wants to get into Pro 4 or SS4 racing …
$ 4000 Cash Jeff Swanson Contact by e-mail only … Speedwaye@comcast.net 9/11
Jeff Swanson Contact by e-mail only … Speedwaye@comcast.net 9/11
6 spline quick change gears
for SALE or TRADE
We have sets #
r&p r&p
4.11 3.78
18a -7.19 6.62
19 -7.36 6.75
20 -7.40 6.80
21 -7.73 7.12
27 -7.60 6.98
28 -7.81 7.16
29 -7.81 7.25
We are needing sets # 3a,3b,4,5,5a,6
We are selling the quick change gears for $50 a piece. Some are new in box or if you have a set of gears we need and we have gears you need we are willing to trade.
Call Rob at 208-941-4652 or
Ken at 208-861-835810/11
10/11for sale pro-4 race car
"TURN KEY !!! " READY TO RACE !!!
Ford Cosworth race motor - dual side draft 44 Weber carbs - Hendricks Motorsports Aluminim Radiator- dry sump system -sitting on 4 brand new sticker tires- kevlar/fiberglass hood and roof -
speedway 9'' Quik change rear end w/ over 24 sets of gears for any track application - 5 speed Ford Ranger transmission - 4 radio sets with headsets - 8 tire cart w/ nitrogen tank rack built in - many extra parts - too many to list - all the really good guy parts - call Phil Pratt at (760) 295-5588 or at (951) 315-5207 asking $10,000 for all race equipment and parts ( or best offer) all offers considered. 11/11
11/119/11
$7,500.00 - I am open to trades, delivery available. 541-554-1073 9/11
9/11PRO4 FOR SALE
Quick change, new chassis 2 races new 2300 Ford motor.
$8,500.00
E-mail steadfast_fy@yahoo.com
11/11
2.3 dry sump
D-port
aluminum
head motor
for sale
Motor has 12 races
on it. Pump, hoses
and oil reserve tank
included. This motor
build by Nat at Nat's
Motors and I have all
the paperwork on it.
New this would cost
$12,000 I would like
to get $7,000 for
everything.
You can call Nat or
me for more details.
I also have a complete MSD ignition system with 1 season on it. MSD box, Coil and Distributor $500.
I am in Somerset, Ma. 02726
Call Kevin @ 508-498-8718 11/11
11/11
SOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDEsslinger 2.3 D-port iron
roller head FOR SALE
Esslinger built 2.3 Ford cast iron head. 1.89/1.59 Ferrera valves, competition ported, 2232 roller cam. Complete, 8 races on valves and springs. Nice shape, ready to bolt on, $950 plus the ride to
your location. In wooden shipping box-88lbs from 83501.
Call John Jackson
208-743-5721 weekdays 2/12
2/12Take it all for $7.500! Just the Esslinger head is worth that !
NEW Esslinger motor (- the block)
Arca head 5 tower
New piston
New rods
New Crank (3.625)
New valve cover
New match intake bench flow
New still in box's Distributors (qty 3)
New .040 /2300 motor all new just needs to put together
rebuit .030/ motor cast iron head d port
.030 block
2 used stock cranks
Wayne S. Howard Jr
wshowardjr@hotmail.com
cell is 253-350-9983
leave contact info. and I will call them back
2/12